Commodity: Stone wall Type No.1
Products No.: Stone wall type No.1
Classification: 1st visible surface: raw cut
2nd front and top surface: raw cut; back surface: sawn
Usage: It can be used as a retaining wall to mark a boundary between different terrain, the inner courtyards or plazas, or road and etc. It is easily installed and nice looking.
Stone: granite
Quality: conform to EN standards and GB standards
Color: light grey, grey, dark red, black, dark grey.
Surface treatment: 1, visible surfaces: raw cut with bump of max.100mm in height.
2, bottom: raw cut or sawn.
3, joint surface: sawn in right angle.
4, back surface: raw cut or sawn
Size:
The length of each piece of wall is in the range of 500mm - 2000mm, the total length will meet requirements.
Commodity |
Visible height |
Total height |
Thickness of wall without height of bump |
Height of bump |
Height under base |
weight |
|
mm |
mm |
mm |
mm |
mm |
Kg/m |
Stone wall type No.1-550 |
350 |
550+/-50 |
200+/-5 |
20-100 |
Min.180 |
520 |
Stone wall type No.1-700 |
500 |
700+/-50 |
200+/-5 |
20-100 |
Min.180 |
660 |
Stone wall type No.1-800 |
600 |
800+/-50 |
200+/-5 |
20-100 |
Min.180 |
750 |
Stone wall type No.1-900 |
700 |
900+/-50 |
200+/-5 |
20-100 |
Min.180 |
850 |
Stone wall type No.1-1000 |
800 |
1000+/-50 |
200+/-5 |
20-100 |
Min.180 |
920 |
Stone wall type No.1-1200 |
1000 |
1200+/-50 |
200+/-5 |
20-100 |
Min.180 |
1100 |
Remarks:
1) Stone wall with raw cut surface is cut with 10mm joint gap between each 2 pieces and 200mm width of stone wall excluding height of bump on front and back surfaces.
2) We can supply you radial stone wall
3) We can supply stone wall according to clients’ requirements.